RoughOut Store


Make Your Own Helvie Knife


$22.00

Please Choose:




Now you can make your own Helvie knife!

With each knife making kit you will receive the following;

  1.  Knife blade of choice from the options available.
  2. One piece of black paper spacer.
  3. One piece of natural canvas micarta
  4. Two pieces of pakkawood, routered specifically for the blade option you choose, to epoxy together. The pakkawood measures approximately each piece; 5" in length, 3/8" thick, 1 3/16" in width.

The following blade options are available (approximate lengths);

  •  Detail 1 1/4" blade (overall length 2 1/2"), .035 thickness, sharpened and ready to carve with. $25
  •  Medium detail 1 1/2" (overall length 3"), .035 thickness, sharpened and ready to carve with. $25
  •  Roughout 1 3/4" blade (overall length 3 1/4"), .050 thickness, sharpened and ready to carve with. $27
  •  Roughout 2" blade (overall length 3 1/2"), .050 thickness, sharpened and ready to carve with. $27
  •  Medium detail overall blade length 3", .035 thickness, unsharpened stock steel. $22
  •  Roughout overall blade length 3 1/2", .050 thickness, unsharpened stock steel. $25

All steel is already heat treated and hardened to a 58R. With the "unsharpened" blades you can shape and sharpen yourself however you like. **But word of caution, be careful when putting an edge on/sharpening that you do NOT heat the blade up too much because you will change the hardness of the steel and ruin it.

As with the already sharpened blades, please use caution when epoxying your knife together so you do not cut yourself.

***Helvie Knives LLC is not responsible for any injuries incurred while making your Helvie knife.

  • Shipping Wt: 0.125lbs